Emerald-Cut Ruby CZ Ring, Gold-Tone Halo

Emerald-cut ruby-red CZ framed by tapered baguettes and round CZs, in 925 silver with yellow-gold plating. Sizes 6-10, 3.7 g.

This is a cocktail ring built around one stone. The emerald cut gives a slower, glassier flash than a brilliant cut - the flat steps reflect in bands rather than sparkles, which is why the red reads deep instead of bright. That property is what makes the design work: a large red stone in a brilliant cut can look like glass, while the same stone in a step cut holds its colour.

The halo follows the centre stone's geometry rather than fighting it. Tapered baguettes run down the two long sides, round brilliant CZs fill the four corners where a baguette cannot turn, and the frame sits slightly above the shank so the stones catch light from the side as well as from above. Because the baguettes are set in channels rather than prongs, the outer edge stays smooth - nothing catches on a sleeve or a knit.

The shank is a plain 2.1 mm round band. That is deliberate. With a 12 x 10 mm centre and a double row of stones around it, adding pave to the shoulders would only compete with the head. The gallery underneath is open, which lets the stone sit lower on the finger and holds the finished weight at 3.7 g despite the visual size.

Sizing runs US 6 to 10. Half sizes and UK or EU equivalents are handled at the CAD stage before casting, and because the setting geometry does not change with ring size, a size adjustment does not push the lead time out.

For private label, three things change without a new mould: the plating colour (yellow gold, rose gold or rhodium), the centre stone colour (ruby, emerald, sapphire, amethyst or clear), and the logo, laser-engraved inside the shank or stamped on the outer band. Changing the cut of the centre stone needs a new setting tool, so that is quoted separately.

Minimum order is 2 pcs per colourway depending on the plating combination. Physical samples ship within 7 days, and if you need the plating matched to a brand colour or an existing packaging palette, send the reference and the sample is finished to it.

Every batch is tested for lead, cadmium and nickel and holds to EU limits, with material certificates and QC reports issued per batch - so the ring can go into EU and UK retail without a second round of testing on your side.

Where it sells: occasion and cocktail ranges where a coloured centre stone is the whole point, and bridal-adjacent collections using ruby red as a birthstone or anniversary colour. It photographs well both flat-laid and on the hand, which matters for marketplace listings where the thumbnail is the entire pitch.